problema object

InceMan · February 2, 2017

Salut, am o problema de scurt timp am facut un system de mapper direct din samp el ruleaza ok doar ce nu imi merge mie bine este atunci cand salvez objectele

stock SaveObjects()
{
new idx;
new File: file2;
while (idx < sizeof(ObjectInfo))
{
new coordsstring[256];
format(coordsstring, sizeof(coordsstring), "CreateDynamicObject(%d, %f, %f, %f, %f, %f, %f, %d)\n",
    ObjectIDTaken[idx],
       ObjectInfo[idx][objModel],
       ObjectInfo[idx][objY],
       ObjectInfo[idx][objZ],
       ObjectInfo[idx][objRX],
       ObjectInfo[idx][objRY],
       ObjectInfo[idx][objRZ],
       ObjectInfo[idx][objSaved],
       ObjectInfo[idx][objVW]);
if(idx == 0)
       {
           file2 = fopen("objects.txt", io_write);
       }
       else
       {
           file2 = fopen("objects.txt", io_append);
       }
       fwrite(file2, coordsstring);
       idx++;
       fclose(file2);

}
return 1;
}

asa imi arata in objects.txt

CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(1, 0.000000, 2579.666015, 63.570312, 0.000000, 0.000000, 247.253494, 1)
CreateDynamicObject(1, 0.000000, 2557.383544, 77.644691, 0.000000, 0.000000, 265.301696, 1)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)
CreateDynamicObject(0, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0)

deci nu imi arata cordonatele corecte

Edited February 2, 2017 by Geani

andy47 · February 2, 2017

Nu garantez ca functioneaza:

stock SaveObjects()
{
    new File:file2, file[256];
    set(file, "objects.txt");
    file2 = fopen(file, io_write);
    for(new i=0;i<ObjectInfo;i++)
    {
        new coordsstring[256];
        format(coordsstring, sizeof(coordsstring), "CreateDynamicObject(%d, %f, %f, %f, %f, %f, %f, %d)\n",
        ObjectIDTaken[i],
        ObjectInfo[i][objModel],
        ObjectInfo[i][objY],
        ObjectInfo[i][objZ],
        ObjectInfo[i][objRX],
        ObjectInfo[i][objRY],
        ObjectInfo[i][objRZ],
        ObjectInfo[i][objSaved],
        ObjectInfo[i][objVW]);
		fwrite(file2, coordsstring);
        fclose(file2);
    }
    return ( true ) ;
}

Sinner.PWN · February 2, 2017

Arata putin partea cand setezi valoarea unei variabile.

WiDuAlK · February 2, 2017

Nu v-a functiona nici odata. Variabilele mereu vor fi setate pe 0.

Daca vrei sa iti mearga, trb sa alegi alta abordare. Eu sugerez ceva de genu:

SaveObjects(arg1, arg2, arg3, ..., argN)

apoi

format(coordsstring, sizeof(coordsstring), "CreateDynamicObject(%d, %f, %f, %f, %f, %f, %f, %d)\n",
        arg1,
        arg2,
        arg3,
        ...
       	argN);

si apelezi functia de cate ori creezi un nou obiect

Sinner.PWN · February 2, 2017

Acum 1 minut, WiDuAlK a spus:
Nu v-a functiona nici odata. Variabilele mereu vor fi setate pe 0.

Daca vrei sa iti mearga, trb sa alegi alta abordare. Eu sugerez ceva de genu:
SaveObjects(arg1, arg2, arg3, ..., argN)
apoi
format(coordsstring, sizeof(coordsstring), "CreateDynamicObject(%d, %f, %f, %f, %f, %f, %f, %d)\n",
        arg1,
        arg2,
        arg3,
        ...
       	argN);
si apelezi functia de cate ori creezi un nou obiect

De ce sa fie setate pe 0?

WiDuAlK · February 2, 2017

Chiar acum, SoNNy.sys a spus:

De ce sa fie setate pe 0?

Un simplu debugging v-a arata exact cea ce am spus.

Sinner.PWN · February 2, 2017

Acum 1 minut, WiDuAlK a spus:

Un simplu debugging v-a arata exact cea ce am spus.

Eu te-am intrebat de ce o sa fie mereu pe 0 daca el stocheaza in variabila aia un float, si mai tarziu o acceseaza aici.

Off: se scrie "va" pentru ca e viitor.

Edited February 2, 2017 by SoNNy.sys

WiDuAlK · February 2, 2017

Chiar acum, SoNNy.sys a spus:

Eu te-am intrebat de ce o sa fie mereu pe 0 daca el stocheaza in variabila aia un float?

Off: se scrie "va" pentru ca e viitor.

Cum spui tu, simplu, ca sa faci sa mearga trb sa tii evidenta tuturor obiectelor de la bun inceput. E limpede ca codul a fost copiat de undeva, dar nu a fost interpretat corect, mai ales partea de creare. Poate creeaza obiectul pe moment si il afiseaza, dar modul cum isi face stocarea variabilelor e gresit, iar cea mai simpla metoda de a salva eficient obiectele in fisierul .txt este cum i-am aratat eu, deoarece, daca apeleaza functia in momentul cand se inchide serverul, risca sa piarda din date.

Sinner.PWN · February 2, 2017

Chiar acum, WiDuAlK a spus:

Cum spui tu, simplu, ca sa faci sa mearga trb sa tii evidenta tuturor obiectelor de la bun inceput. E limpede ca codul a fost copiat de undeva, dar nu a fost interpretat corect, mai ales partea de creare. Poate creeaza obiectul pe moment si il afiseaza, dar modul cum isi face stocarea variabilelor e gresit, iar cea mai simpla metoda de a salva eficient obiectele in fisierul .txt este cum i-am aratat eu, deoarece, daca apeleaza functia in momentul cand se inchide serverul, risca sa piarda din date.

Frate atata timp cat el stocheaza de exemplu ObjectInfo[objY] nu are motiv pentru care sa i se reseteze cand vrea sa-i verifice valoarea mai tarziu, de aia i-am cerut codul unde creeaza el obiectele Si repet, de ce sa fie setate pe 0?

InceMan · February 2, 2017

Acum 19 minute, SoNNy.sys a spus:

Arata putin partea cand setezi valoarea unei variabile.

CMD:createobject(playerid, params[])

   {
   if(PlayerInfo[playerid][pAdmin] >= 3 || PlayerInfo[playerid][pMapper] >= 1)
   {
           new id = GetAvailableID(TYPE_OBJECT), Float:x, Float:y, Float:z, Float:a;
           if (id == -1) return SendClientMessage(playerid, GREY, " Objects are at their maximum. Cannot continue.");
           GetPlayerPos(playerid, x, y, z); GetPlayerFacingAngle(playerid, a);
           if(ObjectIDTaken[id]) return SendClientMessage(playerid, GREY, "ID is taken, choose another.");
           new tmp[420];
   new idx, string[256];
           tmp = strtok(params, idx);
           if(!strlen(tmp))
       {
           SendClientMessage(playerid, COLOR_GRAD1, "{33ccff}Utilizeaza:{FFFFFF} /createobject [objectid] ");
           return 1;
       }
           new modelid = strval(tmp);
           if(!IsValidModel(modelid)) return SendClientMessage(playerid, GREY, "Invalid object ID.");
           ObjectIDTaken[id] = 1;
           ObjectInfo[id][objModel] = modelid;
           ObjectInfo[id][objX] = x;
           ObjectInfo[id][objY] = y;
           ObjectInfo[id][objZ] = z;
           ObjectInfo[id][objRX] = 0;
           ObjectInfo[id][objRY] = 0;
           ObjectInfo[id][objRZ] = a;
           ObjectInfo[id][objID] = CreateDynamicObject(modelid, x, y, z, 0, 0, a, GetPlayerVirtualWorld(playerid));
           ObjectInfo[id][objSaved] = 1;
           ObjectInfo[id][objVW] = GetPlayerVirtualWorld(playerid);
           objects++;
           SendClientMessage(playerid, LIGHTBLUE, "Object created, now use /editobject [id] to edit it.");
           format(string, sizeof(string), "The object ID is: %d (you can use this id to /editobject with it).", id);
           SendClientMessage(playerid, LIGHTBLUE, string);
   return 1;
        }
       else
       {
       SendClientMessage(playerid, GREY, " You are not authorized to use that command.");
       }
       return 1;
   }

CMD:saveobjects(playerid, params[])
   {
if(PlayerInfo[playerid][pAdmin] >= 3 || IsAMapper(playerid))
   {
           SendClientMessage(playerid, LIGHTBLUE, "* All objects saved.");
           SendClientMessage(playerid, COLOR_YELLOW,"All Objects have been saved to objects.txt");
           SaveObjects();
           return 1;
       }
       else
       {
       SendClientMessage(playerid, GREY, " You are not authorized to use that command.");
       }
       return 1;
   }

daca este nevoie dau si stock LoadObjects()

Edited February 2, 2017 by Geani

WiDuAlK · February 2, 2017

Acum 1 minut, SoNNy.sys a spus:

Frate atata timp cat el stocheaza de exemplu ObjectInfo[objY] nu are motiv pentru care sa i se reseteze cand vrea sa-i verifice valoarea mai tarziu, de aia i-am cerut codul unde creeaza el obiectele Si repet, de ce sa fie setate pe 0?

Pentru ca valoarea ori nu e setata bine de la inceput,ori e pierduta pe parcurs.

[RW]Robi · February 2, 2017

1 oră în urmă, Geani a spus:

Salut, am o problema de scurt timp am facut un system de mapper direct din samp el ruleaza ok doar ce nu imi merge mie bine este atunci cand salvez objectele

Ce tot spui ma omule?

Toata ziua ceri ajutor, ma indoiesc ca tu stii sa faci un sistem.

InceMan · February 2, 2017

Acum 5 minute, [RW]Robi a spus:

Ce tot spui ma omule?

Toata ziua ceri ajutor, ma indoiesc ca tu stii sa faci un sistem.

Salut omule, daca cer ajutorul cui-va asta nu inseamna ca nu am abar sunt inca sa zicem asa zis incepator si vreau sa aflu cate mai multe nautati daca se poate

InceMan · February 2, 2017

Acum 32 minute, WiDuAlK a spus:
Nu v-a functiona nici odata. Variabilele mereu vor fi setate pe 0.

Daca vrei sa iti mearga, trb sa alegi alta abordare. Eu sugerez ceva de genu:
SaveObjects(arg1, arg2, arg3, ..., argN)
apoi
format(coordsstring, sizeof(coordsstring), "CreateDynamicObject(%d, %f, %f, %f, %f, %f, %f, %d)\n",
        arg1,
        arg2,
        arg3,
        ...
       	argN);
si apelezi functia de cate ori creezi un nou obiect

uite am facut un edit la saveobject e bine cum am facut?

stock SaveObjects()
{
   new idx = 1, File:file2;
   new string[256];
   while (idx < sizeof(ObjectInfo))
   {
   format(string, sizeof(string), " CreateDynamicObject(%d,%f,%f,%f,%f,%f,%f);\r\n",
ObjectInfo[idx][oModel],
ObjectInfo[idx][oX],
ObjectInfo[idx][oY],
ObjectInfo[idx][oZ],
ObjectInfo[idx][oRX],
ObjectInfo[idx][oRY],
ObjectInfo[idx][oRZ]);
if(idx == 1)
   {
   file2 = fopen("objects.txt", io_write);
   }
   else
   {
       file2 = fopen("objects.txt", io_append);
   }
       fwrite(file2, string);
       fclose(file2);
       idx++;
   }
   print("Objects saved successfully.");
   return 1;
}

Edited February 2, 2017 by Geani

Sinner.PWN · February 2, 2017

Acum 1 minut, Geani a spus:

Salut omule, daca cer ajutorul cui-va asta nu inseamna ca nu am abar sunt inca sa zicem asa zis incepator si vreau sa aflu cate mai multe nautati daca se poate

Atunci cand folosesti comanda stocheaza doar id-urile obiectelor gen obiect[ 0 ] = CreateDynamicObject(..); etc iar cand vrei sa le salvezi folosesti GetDynamicObjectPos(obiect[ 0 ], Float:x, Float:y, Float:z)
GetDynamicObjectRot(obiect[ 0 ], Float:rx, Float:ry, Float:rz).

Nu uita sa folosesti corect si callback-ul atunci cand editezi obiectul si faci ceva de genul:

public OnPlayerEditDynamicObject( playerid, objectid, response, Float:x, Float:y, Float:z, Float:rx, Float:ry, Float:rz)
{
	switch( response )
	{
		case EDIT_RESPONSE_FINAL:
		{
			for(new i=0; i < TotalObiecte; i++)
            {
				if( objectid == obiect[ i ] )
				{
					SetDynamicObjectPos( obiect[ i ], Float:x, Float:y, Float:z );
					SetDynamicObjectRot( obiect[ i ], Float:rx, Float:ry, Float:rz );
					SendClientMessage( playerid, ~1, "Ai plasat obiectul cu succes la noua pozitie!" );
				}
			}
		}
		case EDIT_RESPONSE_CANCEL: SendClientMessage( playerid, ~1, "Ai anulat editarea obiectului curent!" );
	}
}

InceMan · February 2, 2017

Acum 14 minute, SoNNy.sys a spus:
Atunci cand folosesti comanda stocheaza doar id-urile obiectelor gen obiect[ 0 ] = CreateDynamicObject(..); etc iar cand vrei sa le salvezi folosesti GetDynamicObjectPos(obiect[ 0 ], Float:x, Float:y, Float:z)
GetDynamicObjectRot(obiect[ 0 ], Float:rx, Float:ry, Float:rz).

Nu uita sa folosesti corect si callback-ul atunci cand editezi obiectul si faci ceva de genul:
public OnPlayerEditDynamicObject( playerid, objectid, response, Float:x, Float:y, Float:z, Float:rx, Float:ry, Float:rz)
{
	switch( response )
	{
		case EDIT_RESPONSE_FINAL:
		{
			for(new i=0; i < TotalObiecte; i++)
            {
				if( objectid == obiect[ i ] )
				{
					SetDynamicObjectPos( obiect[ i ], Float:x, Float:y, Float:z );
					SetDynamicObjectRot( obiect[ i ], Float:rx, Float:ry, Float:rz );
					SendClientMessage( playerid, ~1, "Ai plasat obiectul cu succes la noua pozitie!" );
				}
			}
		}
		case EDIT_RESPONSE_CANCEL: SendClientMessage( playerid, ~1, "Ai anulat editarea obiectului curent!" );
	}
}

ok am sa tin cont multumesc !

andy47 · February 2, 2017

Acel stock SaveObjects l-am vazut ceva timp in urma pe sa-mp.com, daca nu ma indoiesc este identic. Tipul avea aceeasi problema. De ce sa folosesti file? cand ca pe mysql e mult mai usor.

InceMan · February 2, 2017

1 oră în urmă, andy47 a spus:

Acel stock SaveObjects l-am vazut ceva timp in urma pe sa-mp.com, daca nu ma indoiesc este identic. Tipul avea aceeasi problema. De ce sa folosesti file? cand ca pe mysql e mult mai usor.

acum imi salveaza toate cele 3 poziti dar nu imi arata objectul creat dupa restart

CreateDynamicObject(13749, -243.924240, 2580.670410, 63.570312, 0.000000, 0.000000, 309.251892);
CreateDynamicObject(19608, -242.535751, 2557.325195, 77.544624, 0.000000, 0.000000, 265.635528);

WopsS · February 5, 2017

On 03.02.2017 at 0:03 AM, Geani said:

acum imi salveaza toate cele 3 poziti dar nu imi arata objectul creat dupa restart

CreateDynamicObject(13749, -243.924240, 2580.670410, 63.570312, 0.000000, 0.000000, 309.251892);
CreateDynamicObject(19608, -242.535751, 2557.325195, 77.544624, 0.000000, 0.000000, 265.635528);

Deschide un alt subiect pe tema asta si marcheaza raspunsul care te-a ajutat.

InceMan · February 5, 2017

Acum 14 minute, WopsS a spus:

Deschide un alt subiect pe tema asta si marcheaza raspunsul care te-a ajutat.

pai tot asa imi merge nu am mai facut nimic cand le copi din fisier si le adaug pe server nu se pun

WopsS · February 5, 2017

Ai zis ca ai rezolvat problema cu salvarea coordonatelor, nu?

InceMan · February 5, 2017

Acum 1 minut, WopsS a spus:

Ai zis ca ai rezolvat problema cu salvarea coordonatelor, nu?

da dar de-ce nu se vad pe server?

WopsS · February 5, 2017

Just now, Geani said:

da dar de-ce nu se vad pe server?

Deschide alt subiect pentru problema asta.

Sign In

problema object

Question

InceMan

22 answers to this question

Recommended Posts

andy47

Sinner.PWN

WiDuAlK

Sinner.PWN

WiDuAlK

Sinner.PWN

WiDuAlK

Sinner.PWN

InceMan

WiDuAlK

[RW]Robi

InceMan

InceMan

Sinner.PWN

InceMan

andy47

InceMan

WopsS

InceMan

WopsS

InceMan

WopsS

Similar Content

Actualizare textdraw (speedometer) la secunda (problema)

Problema /vehicles

Problema billboards (la expirarea billboard-ului nu seteaza variabila Billboard 0 jucatorului offline)

Problema clan members: Nu afiseaza membrii.

Problema dialog dealership (nu afiseaza ID-ul masinii)

Recently Browsing 0 members

Browse

Activity

Important Information